CLEANERS AND DEGREASERS
Acid, alkaline, neutral, etch, desmutting, solvent replacement, immersion and spray, liquid and powder, low temperature, low concentration operation, safe solvent

DERUSTERS & DESCALERS
Acid and alkaline

CHROMATING PROCESSES
For aluminium and galvanised steel

CHROME FREE CONVERSION PROCESSES
For aluminium and galvanised steel

ANODISING PROCESSES
Hard anodising additives, passivating treatments, acid etches, brighteners, rinse aids, die stripping trreatments, electro colouring treatments

PAINT AND POWDER REMOVAL
Cold solvent, heated alkaline, environmentally friendly solvent, recylable low temperature operation

METAL PRETREATMENT ETCH PRIMERS
For steel, aluminium and galvanised substrates

FILM FORMING PROCESSES
Chrome polymer resin, non-rinse, low film thickness, and film-forming processes

DRY IN PLACE Cr FREE TECHNOLOGY
In the UK we manufacture the full range of dry-in-place chromate free technology

ZIRCONIUM PHOSPHATE TECHNOLOGY
Gives the corrosion performance of traditional zinc phosphates and chromates on aluminium without the problems associated with effluent treatment

Cleaners and degreasers

We formulate and manufacture acid, alkaline and neutral Cleaners and Degreasers for etching and desmutting. They come in the form of liquid and powder or for spraying and immersion. They are for low temperature and low concentration operation.  Cleaners and Degreasers are so very effective as when applied to grease stains, they chemically react with the grease particles and produce a deep clean.

A few benefits of using cleaners and degreasers include; effortless application, with a variety of applications for all different surfaces, time-saving, degreasers are designed to work quickly and cost-effective, they are highly affordable and can be bought in bulk.

Anodising dyes

Our professional quality anodising dyes give outstanding results and can be used over again. We specialise in black dye which is made from combining a chemical mixture called ferric ammonium oxalate to an anodized product. The finished look will vary slightly depending on the alloy and surface preparation.  This is the recommended procedure for obtaining dyed anodize: Anodize the aluminum at 15-25°C for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. After rinsing, immerse the part in the dye at a temperature of 60°C for 15 minutes. Finally, seal by hanging the part in a sealer bath for 15 minutes.

Aluminum temperature

Advantages of using anodising dyes include; an anodized finish is chemically stable. It will not decompose, is nontoxic, and is heat-resistant to the melting point of aluminum. Since the anodizing process is a reinforcement of a naturally occurring oxide process, it is non-hazardous and produces no harmful or dangerous by-products.

Film forming process

In the film formation process, a low-viscosity liquid surface coating is applied to a solid substrate. After curing this surface, it produces a solid, high molecular weight, polymer-based adherent film. This film protects a substrate from the attack of corrosive substances as well as corrosion. We sell polymer, chrome and resin film formation. Features of our film forming: low film thickness, various coating applications, protects the surface of the material from the environment.

Dewatering oils

Our dewatering oils are corrosion preventive oils that combine protective properties with outstanding water displacing qualities. Features include: dry to the touch, anti corrosion, anti wear anti rust, removal of moisture,  Lubricates and leaves lasting moisture resistant film.

More Products include:

 

  • Derusters & Descalers
  • Chromating Processes
  • Chrome Free Conversion Processes
  • Anodising Processes